M3 THREAD INSERT NUTS FOR YOUR 3D PRINTED PARTS: The ruthex threaded nuts can be inserted by heat.
Using heat from a soldering iron, the insert nuts are simply embedded in a blind or through hole. FIXED HOLD WITH EASY APPLICATION: Thanks to the geometry of the threaded sleeve, it holds firmly in the compression part.
The opposing spiral knurled nuts ensure a balanced high tightening and loosening torque, as well as a high tightening force.
The guide has made insertion much easier. STABLE & LONG-LASTING INSERT NUTS: The inserts with internal threads are made of the highest quality brass, which ensures optimum corrosion resistance and thermal conductivity.
This means that each insert nut can be used for a long time and is easy to insert.
The reusability of the screw-in threads is also possible by carefully removing them from the pressure part when this may no longer be needed. SUITABLE FOR VARIOUS PLASTICS: The inserts are designed for all thermoplastics. For example, the knurled nuts will hold in PLA, PETG, ABS, PPS, PP and many more. As soon as the plastic of the part around the brass sleeve cools down and hardens again, the female threaded sleeve is firmly anchored. PRACTICAL THREAD INSERT SET: The ruthex thread insert set RX-M3x5.7 consists of
consists of 100 insert nuts with M3 internal thread and a length of 5.7mm.The threaded sleeves can be inserted by heat embedding.
Customer reviews
Unfortunately there are no review yet. Be the first who rate this product.