KiS-3d Silicone Heating Mats

KiS-3d Silicone heating mat 230x230mm
KiS-3d Silicone heating mat 230x230mm
35,50 EUR
incl. 19% tax
KiS-3d Silicone heating mat 230x230mm 230V 500W
-9%
KiS-3d Silicone heating mat 230x230mm 230V 500W
High-quality silicone heating mat

for e.g. S235, TwoTrees Sapphire S and Pro and Creality Ender 3 + 5

230x230mm 230V 500W

3 and 4 point levels possible
with temperature sensor NTC 100 / 3950
Hole for screw in temperature sensor

Cable length 150cm

temperature resistant adhesive foil 3M 467MP

incl. JST connector for the thermistor

Sensor type in Marlin :
30 : Kis3d Silicone heating mat 250W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup)

Attention.

For the operation of a silicone heating mat, a corresponding control electronics designed for this purpose is necessary!
The legal regulations (VDE guidelines) must be followed in any case.
KiS3d does not assume any liability or warranty for damages to objects and persons caused by improper or unauthorized connection.
 
Only 33,00 EUR
incl. 19% tax
KiS-3d Silicone heating mat 240x240mm 230V 500W
KiS-3d Silicone heating mat 240x240mm 230V 500W
High quality silicone heating mat

240x240mm 230V 500W

with temperature sensor NTC 100 / 3950
with temperature fuse (integrated) 150

cable length 100cm
temperature resistant adhesive foil 3M 467MP
incl. JST connector for the thermistor

For the operation of a silicone heating mat, an appropriate control electronics designed for this purpose is necessary. A SSR is necessary.
39,95 EUR
incl. 19% tax
KiS-3d silicone heating mat 290x290mm
KiS-3d silicone heating mat 290x290mm
42,90 EUR
incl. 19% tax
KiS-3d silicone heating mat 380x380mm 230V
KiS-3d silicone heating mat 380x380mm 230V
70,00 EUR
incl. 19% tax
KiS-3d silicone heating mat 480x480mm 230V
KiS-3d silicone heating mat 480x480mm 230V
90,00 EUR
incl. 19% tax
silicone heating mat 300x300 24V 350W
silicone heating mat 300x300 24V 350W
42,90 EUR
incl. 19% tax
DELIXI Solid State Relay Single Phase CDG1-1DA/15A
DELIXI Solid State Relay Single Phase CDG1-1DA/15A
13,00 EUR
incl. 19% tax
DELIXI Solid State Relay Single Phase CDG1-1DA/40A
DELIXI Solid State Relay Single Phase CDG1-1DA/40A
16,50 EUR
incl. 19% tax
Mosfet 12-24V 30A
Mosfet 12-24V 30A
Mosfet 12-24V 30A
Mosfet 30A 3D-Printer - High Power Module - Print Bed/Hot End
The Mosfet 25A module should be connected between the hotbed and the PCB (mainboard), so that the required high current does not reach the PCB, but only the Mosfet module.
This way, the board is not loaded with high currents.
9,90 EUR
incl. 19% tax
Thermal fuse heating bed 125°
Thermal fuse heating bed 125°
4,40 EUR
incl. 19% tax
1 to 11 (from a total of 11)