Density in g/cm3: 1,32
Diameter: 1,75mm +/- 0,03mm
Roundness: +/-3%
Note: Use only with hardened steel nozzle (0,6mm)
Pressure temperature: 230-250°C
Bed temperature: 70- 80°C
Good optical properties
High surface hardness
Flexural strength 120MPa
Density 1.18 g/cm³
Tensile modulus of elasticity 2950
Low flammability
High UV resistance
Dimensional stability is around 85°C
For direct drive and Bowden extruders
Recommended print speed 30-80mm (depending on die temperature and film thickness)
To compensate for unevenness on the print bed, the first layer should be printed with a thickness of 0.3mm
For larger print pieces or not optimal adhesion to the print bed, use temperatures around 85°C.
The first layer should be printed at 110% print width to improve adhesion.
It is advantageous to store the filament with the zip bag and silicate provided.
Customer reviews
Unfortunately there are no reviews yet. Be the first who rates this product.