Main page » *SALE*

SALE

PTFE Bowden tubing 4/2mm white

Only 2,00 EUR

incl. 19% tax

24V diaphragm pump for "Berd-Air" system

24V diaphragm pump for "Berd-Air" system

Only 15,00 EUR

incl. 19% tax

pices:

PS M6 plated copper nozzle1.75mm by Phaetus - 0.4mm

PS M6 plated copper nozzle 1.75mm/0.4mm
Nickel-plated copper nozzles are suitable for all entry-level and general-purpose 3D printing filaments
Due to the extremely high operating temperature, they are also suitable for advanced and technical materials.
The roughness of the inner bore is less than Ra0.4 and the entire nozzle is nickel-plated, which enables higher smoothness and lower adhesion

7,00 EUR

incl. 19% tax

pices:

MK8 nozzle Plated Copper 0,4

is suitable for many different 3D printers

Very good heat conduction due to copper and extremely resistant due to the nickel coating
Nickel-plated copper nozzles are suitable for all entry-level and general-purpose 3D printing filaments

Only 2,00 EUR

incl. 19% tax

pices:

Axial fan KiS-3d by ADDA 40x40x10mm 24 Volt

Axial fan by ADDA
40x40x10mm 24 Volt
Extra class quality, extremely quiet running and at the same time very good performance speak for this fan.

Height 40mm
Width 40mm
Depth 10mm
Operating voltage: 24V DC
Air flow : 9,9 m³/h
Speed : 4400 rpm
Loudness : 22 dB
Cable length: 30cm

incl. JST plug set

Only 6,50 EUR

incl. 19% tax

pices:

Black silicone buffers / heating bed levelling column 25mm

as fixed spacers for the heating bed - simply installed instead of the springs and no more movement is possible. The set level remains!

Made of high quality silicone material, heat resistant and non-stick coated.

Only 2,00 EUR

incl. 19% tax

pices:

GL-8H - Proximity Sensor Inductive

GL-8H - Proximity Sensor Inductive
Compact inductive proximity sensor with LED display
Cable length: 100cm

7,90 EUR

incl. 19% tax

pices:

Mosfet Modul "Berd-Air"

Mosfet module for "Berd-Air" system

E-Z SWITCH PWM-CONTROLLER to control the flow rate
when using e.g. diaphragm pump "Berd Air".

Only 5,00 EUR

incl. 19% tax

pices:

heating cartridge 24V 50W

for heating 3D printer hot ends

The head of the cartridge heater is made of 304 stainless steel and a ceramic core.
The 304 alloy contains the durability of 18% chrome and the soft shine of 8% nickel.
This rich blend of chromium and nickel provides maximum rust and corrosion protection.

Only 2,50 EUR

incl. 19% tax

pices:

Kexcelled PLA Carbon Filament, vacuum packed

PLA Carbon Filament, vacuum packed

Quantity: 1000g
Empty weight spool: 300g
Diameter of spool: ca.20cm - Width: ca.7cm - Inner diameter hub: ca.5cm
Total: 1500g

Density in g/cm3: 1,22
Diameter: 1,75mm +/- 0,02mm
Roundness: +/-3
Carbon fibre 10%
Pressure temperature: 200-230 °C
Bed temperature: (optional) 40-65 °C

Good optical properties
High surface hardness
Flexural strength 112 MPa
Low flammability
High UV resistance
Dimensional stability is about 64 degrees
For direct drive and Bowden extruders

Only 29,00 EUR
29,00 EUR per kg

incl. 19% tax

pices:

SPECTRUM PET-G Carbon Filament, vacuum packed

PET-G Carbon Filament, vacuum packed

Quantity: 1000g
Empty weight spool: 270g
Diameter of spool: ca.20cm - Width: ca.7cm - Inner diameter hub: ca.5cm
Total: 1300g

Density in g/cm3: 1,32
Diameter: 1,75mm +/- 0,03mm
Roundness: +/-3%

Only 33,00 EUR
33,00 EUR per kg

incl. 19% tax

pices:

Linear ball bearing MiSUMi LMUW8 for Anycubic i3

Linear ball bearing MiSUMi LMUW8

Only 4,00 EUR

incl. 19% tax

pices:

Precision linear bearing LHFRW12 MiSUMi

Only 9,00 EUR

incl. 19% tax

pices:

Stepper motor driver DM542

Delivery incl. adapter and cable
The DM542 is designed for all types of 2-phase hybrid stepper motors that have an outer diameter of 42 to 86 mm and require a phase current of less than 4.0 A.
The circuit is similar to those of servo control and allows the motor to run smoothly and with low noise and vibration.